紧固件标准对应表
螺丝紧固件的标准及国标德标国际标准对应表
| 中文品名 | 德国标准 | 中国标准 | 国际标准 | 英文品名 |
|---|---|---|---|---|
| 自攻自钻螺钉多种头型 | DIN7504 | GB15856.1-4 | Self-drilling tapping screws | |
| 平垫 | DIN125-A | GB97.1-85 | ISO7089 | Plain washers |
| 平垫（带倒角） | DIN125-B | GB97.2-85 | ISO7090 | Mediun washers |
| 平垫 | DIN126 | ISO7091 | Plain washers | |
| 重型弹垫 | DIN127-A | GB7244 | Spring lock washers,tang ends | |
| 标准弹垫 | DIN127-B | GB93-87 | Spring lock washers,square ends | |
| 内六角扳手 | DIN911 | ISO2936 | Socket wrenches | |
| 内六角圆柱头螺钉 | DIN912 | GB70-85 | ISO4762 | Hexagon socket cap screws |
| 内六角平端紧定螺钉 | DIN913 | GB77-85 | ISO4026 | Hexagon socket set screws with falt point |
| 内六角尖端紧定螺钉 | DIN914 | GB78-85 | ISO4027 | Hexagon socket set screws with cone point |
| 内六角圆柱端紧定螺钉 | DIN915 | GB79-85 | ISO4028 | Hexagon socket set screws with dog point |
| 内六角凹端紧定螺钉 | DIN916 | GB80-85 | ISO4029 | Hexagon socket set screws with cup point |
| 六角头螺栓）（半牙） | DIN931 | GB5782-86 | ISO4014 | Hexagon head screws |
| 六角头螺栓（全牙） | DIN933 | GB5783-86 | ISO4017 | Hexagon head screws |
| 开槽沉头螺钉 | DIN963 | GB68-85 | ISO2009 | Slotted countersund head screws |
| 开槽半沉头螺钉 | DIN964 | GB69-85 | ISO2010 | Slotted raised countersunk oval head screws |
| 十字槽沉头螺钉 | DIN965 | GB819-85 | ISO7046 | Cross recessed countersunk head screws |
| 十字槽半沉头螺钉 | DIN966 | GB820-85 | ISO7047 | Cross recessed raised |
| 十字槽盘头自攻螺攻 | DIN7981 | GB845-85 | ISO7049 | Pan head tapping screws with cross recessed |
| 十字槽沉头自攻螺攻 | DIN7982 | GB846-85 | ISO7050 | Countersunk flat head tapping screws with cross recessed |
| 十字槽半沉头自攻螺攻 | DIN7983 | GB847-86 | ISO7051 | Raised countersunk oval head tapping screws with cross |
| 开槽盘头自攻螺钉 | DIN7971 | GB5282-85 | ISO1481 | Pan head tapping screws with slot |
| 开槽沉头自攻螺钉 | DIN7972 | GB5283-85 | ISO1482 | countersunk flat head tapping screws with slot |
| 开槽半沉头自攻螺钉 | DIN7973 | GB5284-85 | ISO1483 | Raised sountersunk oval head tapping screws with slot |
| 六角头自攻螺钉 | DIN7976 | GB5285-85 | ISO1479 | Hexagon tapping screws |
| 十字槽盘头螺钉 | DIN7985 | GB818-85 | ISO7045 | Pan head screws with cross recessed |
| 内六角沉头螺钉 | DIN7991 | ISO10642 | Hexagon socket coutersunk head screws | |
| 六角头尼龙锁紧螺母 | DIN982 | GB812-88 | ISO2982 | Prevailing rorque type hexagon nuts,heavy type,with nylon |
| 六角头薄型尼龙锁紧螺母 | DIN985 | GB889.1-86 | ISO7040 | Prevalling torque type hoxagon nuts,heavy type,with nylon |
| 六角盖型尼龙锁紧螺母 | DIN986 | GB6172.2-86 | ISO10511 | Preailling torque typedomed capnuts with nylon insert |
| 六角头螺母（ 1 型） | DIN934 | GB6170-86 | ISO4032 | Hexagon full nuts |
| 细牙六角头螺母（ 1 型） | DIN934 | GB6171-86 | ISO8673 | Hexagon full nuts |
| 六角头薄螺母 | DIN936 | GB6172.1-86 | ISO4035 | Hexagon thin nuts |
| 六角薄螺母 | DIN439 | GB6172-86 | ISO4035 | Hexagon thin nuts |
| 开槽半沉头木螺钉 | DIN95 | GB101 | Slotted raised csk head wood screws | |
| 开槽半圆头木螺钉 | DIN96 | GB99 | Slotted round head wood screws | |
| 开槽沉头木螺钉 | DIN97 | GB100 | Slotted countersunk head wood screws | |
| 鞍形弹垫 | DIN128-A | GB7245-87 | Single coil spring lock washers | |
| 弹簧止动垫圈 | DIN137-A | Curved spring washers | ||
| 波形弹垫 | DIN137-B | GB955 | Wave spring washers | |
| T型方颈螺栓 | DIN186 | GB37-88 | T-head blots with square neck | |
| T型双接头螺栓 | DIN188 | T-head bolts with double nip | ||
| 螺纹圆锥销 | DIN258 | ISO8737 | Taper pins with threaded end | |
| T 型头螺栓 | DIN261 | T-head bolts | ||
| 蝶型螺母（美制） | DIN315AF | Wing nuts America form | ||
| 蝶型螺母（德制） | DIN315DF | GB62-88 | Wing nuts germany form | |
| 蝶型螺母（美制） | DIN316AF | Wing screws America form | ||
| 蝶型螺母（德制） | DIN317DF | Wing screws germany form | ||
| 圆球型盖型螺母 | DIN319 | Ball knobs | ||
| 开槽带孔球面圆柱头蚴钉 | DIN404 | GB832-88 | Slotted capstan screws | |
| 开槽长圆柱端紧定螺钉 | DIN417 | GB75-85 | ISO7435 | Slotted set srews with full dog point |
| 开槽平端紧定螺钉（半牙） | DIN427 | GB73-85 | ISO2342 | Slotted set srews with chamfered end |
| 小六角特薄细牙螺母 | DIN431 | GB808-88 | Pip nuts with thread | |
| 外舌止动垫圈 | DIN432 | GB856-88 | External tap | |
| 小垫圈(用于圆柱头螺钉) | DIN433 | GB848-95 | ISO7092 | Washers for cheese head screws |
| 方斜垫圈（ U 型） | DIN434 | GB852-88 | Square taper washers for | |
| 方斜垫圈（ I 型） | DIN435 | GB852-88 | Square taper washers for | |
| 方垫圈 | DIN436 | Square washers | ||
| 开槽凹端紧定螺钉 | DIN438 | GB74-85 | ISO7436 | Slotted set with cup point |
| 细牙六角薄螺母 | DIN439 | GB6173-86 | ISO8675 | Hexagon thin nuts |
| 木螺钉专用垫圈 | DIN440 | ISO7094 | Rounds washers for wood constructions | |
| 密封帽 | DIN443 | Sealing caps,push-in type | ||
| 活节螺栓 B 型 | DIN444 | GB798-88 | Eye bolts form B | |
| 内舌止动垫圈 | DIN462 | Internal tab washers | ||
| 双耳止动垫圈 | DIN463 | GB855-88 | Washers with two taps | |
| 滚花高头螺钉 | DIN464 | GB834-88 | Knurled thumb screws with collar | |
| 开槽滚花高头螺钉 | DIN465 | Slotted knurled thumb screws with collar | ||
| 滚花高螺母 | DIN466 | GB806-88 | Knurled thumb nuts with collar | |
| 滚花薄螺母 | DIN467 | GB807-88 | Knurled thumb thin nuts | |
| 锁紧垫圈 | DIN470 | Sealing washers | ||
| 轴用弹性垫圈 | DIN471 | GB893-86 | Retaining rings for shafts(external),circlips | |
| 孔用弹性垫圈 | DIN472 | GB893.86 | Retaining rings for bores(internal),circlips | |
| 方头带垫螺栓 | DIN478 | Square head bolts with collar | ||
| 方头圆柱底端螺栓 | DIN479 | Square head bolts with half dog point | ||
| 方头带垫关圆底端螺栓 | DIN480 | Square head bolts with collar,half dog point | ||
| T 型槽螺母 | DIN508 | ISO299 | T-slot nuts | |
| 单头螺柱 | DIN525 | Single end studs | ||
| 地脚螺栓 | DIN529 | GB799-88 | Masonry bolts | |
| 带槽圆螺母 | DIN546 | GB817-76 | Slotted round nuts | |
| 端面带孔圆螺母 | DIN547 | GB815-88 | Round nuts with drilled holes in one face | |
| 开槽平端紧定螺钉 | DIN551 | GB73-85 | ISO4776 | Slotted set screws with flat point |
| 开槽锥端紧定螺钉 | DIN553 | GB71-85 | ISO7434 | Slotted set screws with cone point |
| 六角螺母 | DIN555 | ISO4034 | Hexagon nuts | |
| 方螺母 -C | DIN557 | GB39-88 | Square nuts | |
| 六角头螺钉 | DIN558 | ISO4018 | Hexagon screws | |
| 六角头圆柱端紧定螺钉 | DIN561 | Hexagon set screws with full dog point | ||
| 薄型方螺母 -B | DIN562 | Square nuts without bevel | ||
| 六角头木螺钉 | DIN571 | GB102-86 | Hexgon head wood screw | |
| 吊环螺钉 | DIN580 | GB825-76 | ISO3266 | Lifting eye bolts |
| 吊环螺母 | DIN582 | Lifting eye nuts | ||
| 六角头螺栓 | DIN601 | ISO4016 | Hexagon blots | |
| 大半圆头方颈螺栓（马车螺栓） | DIN603 | GB14-88 | ISO8677 | Mushroom head square neck bolts(carriage bolts) |
| 沉头带插销马车螺栓 | DIN604 | Flat countersunk nib bolts | ||
| 沉头长方颈马车螺栓 | DIN605 | Flat countersunk long squareneck bolts | ||
| 半圆头带插销马车螺栓 | DIN607 | Cup head nib bolts | ||
| 沉头短方颈马车螺栓 | DIN608 | Flat countersunk short square neck bolts | ||
| 六角头精配螺栓（长螺纹） | DIN609 | Hexagon fitted bolts,long thread | ||
| 六角头精配螺栓（短螺栓） | DIN610 | Hexagon fitted bolts short thread | ||
| 滚花平头螺钉 | DIN653 | GB835-88 | Knurled thumb screws thin type | |
| 半圆头铆钉 | DIN660 | GB867-86 | ISO1051 | Round head rivets |
| 沉头铆钉 | DIN661 | GB869-86 | ISO1051 | Contersunk head rivets |
| 半 沉头铆钉 | DIN662 | ISO1051 | Raised contersunk head rivets | |
| 大扁头铆钉 | DIN674 | ISO1051 | Mushroom head rivets | |
| 重型侧面带孔圆螺母 | DIN703 | Adjusting rings,heavy range(shafting collars) | ||
| 侧面带孔圆螺母 | DIN705 | GB816-88 | Adjusting rings,light range(shafting collars) | |
| 卡头 | DIN741 | Wire rope clips | ||
| T 型槽螺钉 | DIN787 | ISO299 | T-slot screws | |
| 双头螺柱（牙长 =2D ） | DIN835 | GB900-88 | Studs-metal(end=2d) | |
| 内六角锥型闭锁螺钉 | DIN906 | Hexagon socket pipe plugs,conical thread | ||
| 内六角直型闭锁螺钉 | DIN908 | Thread | ||
| 外六角锥型闭锁螺钉 | DIN909 | Thread | ||
| 外六角直型闭锁螺钉 | DIN910 | Hexagon head screw plugs,cyl.thread | ||
| 薄型盲螺母 | DIN917 | Hexagon cap nuts | ||
| 开槽小圆柱头螺钉 | DIN920 | Slotted short cheese head screws | ||
| 开槽大圆柱头螺钉 | DIN921 | GB838-88 | Slotted large cheese head screws | |
| 开槽圆柱头轴肩螺钉 | DIN923 | GB830-88 | Slotted pan head screw with shoulder | |
| 开槽无头轴肩螺钉 | DIN927 | Slotted shoulder screws | ||
| 焊接方螺母 | DIN928 | GB/T13680-92 | Square weld nuts | |
| 焊接六角螺母 | DIN929 | GB/T13681-92 | Hexagon weld nuts | |
| 六角头螺母 | DIN970 | Hexagon nuts type-1 | ||
| 六角头螺母 | DIN971 | Hexagon nuts type-2 | ||
| 细牙六角头螺母（ 2 型） | DIN972 | Hexagon nuts with fine thread | ||
| 开槽六角螺母 | DIN935 | GB6178-86 | ISO7035 | Hexagon slotted and castle nuts |
| 六角头开槽薄螺母 | DIN937 | GB6181-86 | ISO7038 | Hexagon thin slotted and caslte nuts |
| 双头螺距（牙长 =1D ） | DIN938 | GB897-88 | Studs metal(end=1d) | |
| 双头螺距（牙长 =1.5D? | DIN939 | GB898-88 | Studs metal(end=1.25d) | |
| 双头螺距（牙长 =1.25D? | DIN940 | Studs metal(end=1.5d) | ||
| 六角头细牙螺栓（全牙） | DIN960 | GB5785-86 | ISO8765 | Hexagon head bolts,metric fine pitch thread |
| 六角头细牙螺栓（半牙） | DIN961 | GB8786-86 | ISO8676 | Hexagon head bolts,metric fine pitch thread |
| 头部穿孔六角头螺栓 | DIN962 | Additional shapes and versions for bolts | ||
| 牙条（全螺纹） | DIN975 | GB6176-86 | ISO8674 | Threaded rods(studdings) |
| 螺纹销 | DIN976 | GB15389-94 | Threaded pins(stud bolts) | |
| 六角头开槽薄螺母2 型 | DIN979 | Hexagon thin slotted and castle nuts | ||
| 全金属六角锁紧螺母 1 型 | DIN980 | Prevaillng rorque type hexagon nuts,all metal nuts | ||
| 圆螺母 | DIN981 | GB6184-86 | ISO7199 | Locknuts |
| 配合垫片 | DIN988 | Shim rings | ||
| 木材连接用垫片 | DIN1052 | Washers for timber connectors | ||
| 沉头钢钉 | DIN1151 | Round plain head nails | ||
| 销钉专用垫片 A 型 | DIN1440 | ISO8738 | Plain washers for clevis pins(A 型 ) | |
| 销钉专用垫片 | DIN1441 | Plain washers for clevis pins | ||
| 带头销钉 | DIN1444 | ISO2341 | Clevis pins with head | |
| 圆锥型槽销 | DIN1471 | GB/T13829.2 | ISO8744 | Grooved pins,taper grooved |
| 圆锥型槽销（半槽） | DIN1472 | GB/T13829.2 | ISO8745 | Grooved pins,taper grooved half length |
| 平行槽销（带倒角） | DIN1473 | ISO8100% | Grooved pins,parallel grooved full length | |
| 前端凹槽槽销 | DIN1474 | ISO8741 | Grooved pins,reverve grooved half length | |
| 中部凹槽槽销 | DIN1475 | ISO8742 | Grooved pins,center grooved | |
| 圆头槽销 | DIN1476 | ISO8746 | Grooved pins with round head | |
| 沉头槽销 | DIN1477 | ISO8747 | Grooved pins with countersunk head | |
| 六角螺母棒 | DIN1479 | Turnuckles(center parts),made out of hexagon bar | ||
| 花蓝螺栓 | DIN1480 | Turnuckles with eye bolt and hook bolt | ||
| 弹性圆柱销 | DIN1481 | GB879-86 | ISO8752 | Spring pins,heavy type |
| 组合式盖型螺母 | DIN1587 | GB802-88 | Hexagon domed cap nuts | |
| 开槽圆螺母(配合沟头扳手) | DIN1804 | Slotted round nuts for hook spammer | ||
| 圆螺母（带插销孔） | DIN1816 | Round nuts with set holes | ||
| 盘型弹簧垫圈 | DIN2093 | Disc springs | ||
| 喉箍 | DIN3017 | Hose clamps | ||
| 润滑油嘴（旋扭头） | DIN3404 | Lubricating nipples,button head | ||
| 管夹 | DIN3567 | Shackles for conduilts | ||
| U 型螺栓 | DIN3570 | Stirrup bolts(U-bolts) | ||
| 球面垫圈 | DIN6319 | GB849-88 | Spherical washers,conical seats | |
| 圆柱销 | DIN6325 | ISO8734 | Parallel pins | |
| 厚六角螺母 | DIN6330 | GB56-88 | Hexagon nuts,1.5d | |
| 厚六角法兰面螺母 | DIN6331 | GB6177-86 | Hexagon nuts,1.5d with collar | |
| 长六角螺母 | DIN6334 | Hexagon nuts,3d | ||
| 外齿锁紧垫圈 | DIN6797-A | GB862.1-87 | External teeth lock washers | |
| 内齿锁紧垫圈 | DIN6797-I | GB861.1-87 | Internal teeth lock washers | |
| 外锯齿锁紧垫圈 | DIN6798-A | GB862.2-87 | External teeth serrated lock washers | |
| 内锯齿锁紧垫圈 | DIN6798-I | GB861.2-87 | Internal teeth serrated lock washers | |
| 开口挡圈 | DIN6799 | GB896-76 | Retaining rings for shafts(E-rings),circlips | |
| 平键（ A 型） | DIN6885 | ISO773/2491 | Parallel keys(form A) | |
| 半圆键 | DIN6888 | ISO3912 | Woodruff keys | |
| 嵌环（支撑环） | DIN6899 | Thimbles | ||
| 机器螺钉和垫圈组合件 | DIN6900 | Screws and washers assemblies | ||
| 自攻螺钉和垫圈组合件 | DIN6901 | GB9074.1-17 | Tapping screws and washer assemblies | |
| 薄型带孔内六角圆柱螺钉 | DIN6912 | GB9074.18-23 | Hexagon cocket head cap screws with hole,low head | |
| 大六角头螺栓 | DIN6914 | Hexagon head bolts with large head | ||
| 大六角螺母 | DIN6915 | Hexagon nuts with large wideth across flat | ||
| 大垫圈 | DIN6916 | Round washers for friction grip bolts | ||
| 楔型方垫圈 | DIN6917 | Spuare taper washers for friction grip bolts on T- | ||
| 六角法兰面螺母 | DIN6923 | GB6187-86 | ISO4161 | Hexagon flange nuts |
| 全金属六角锁紧螺母 2 型 | DIN6925 | GB6185.1-2000 | ISO7042 | Prevailing torque type hexagon nuts,all metallic nuts |
| 轻型弹性圆柱销 | DIN7346 | ISO13337 | Spring pins,light type | |
| 重型弹性圆柱销用垫圈 | DIN7349 | Washers for bolts with heavy type spring pinss | ||
| ISO 公制螺纹螺钉多种头型 | DIN7500 | Thread forming screws for ISO-metric thread | ||
| 开槽切削螺纹螺钉（多种头型） | DIN7513 | Thread cutting screws | ||
| 十字槽切削螺纹螺钉（多种头型） | DIN7516 | Thread cutting screws cross recess | ||
| T 型四爪螺母 | DIN7965 | Tee nuts with pronge | ||
| 钢结构用六角头螺栓连接副 | DIN7968 | GB1228/1229/1230 | Hexagon head fitted bolts for steel structures | |
| 圆柱头螺钉用弹簧垫圈 | DIN7980 | ISO8738 | Spring lock washers for screws with cylindrical heads | |
| 薄型内六角圆柱头螺钉 | DIN7984 | Hexagon socket head cap screws with,reduced head | ||
| 钢结构用垫圈 | DIN7989 | GB1230-84 | Washers for steel structures | |
| 钢结构用六角头螺栓 | DIN7990 | GB1229-84 | Hexagon head bolts for steel structures | |
| 轴用钢丝挡圈 | DIN7993 | GB895.2-86 | Roundwire snap rings for shafts | |
| 十字槽半沉头木螺钉 | DIN7995 | GB952-86 | Cross recessed raised countersunk head wood screws | |
| 十字槽圆头木螺钉 | DIN7996 | GB950-86 | Cross recessed round head wood screws | |
| 十字槽沉头木螺钉 | DIN7997 | GB951-86 | Cross recessed countersunk head wood screws | |
| 螺纹护套(普通、自锁等) | DIN8140 | Ciol inserts,coarse,fine thread,silf locking | ||
| 大外径垫圈 | DIN9021 | GB96-85 | ISO7093 | Washers,outside diameter appro.3d |
| 弹簧卡子 | DIN11024 | sping cotter for a bolt | ||
| 平板螺栓 | DIN13257 | Belting bolts(elevator bolts) | ||
| 干壁钉（墙板钉） | DIN18182 | Dry wall screws | ||
| 环型螺母 | DIN28129 | GB63-88 | Lifting nuts(eye nuts) | |
| 圆螺母用止退 | DIN70952 | Tab washer for slotted round nuts | ||
| 圆锥销 | DIN1 | GB117 | ISO2339 | Taper pins |
| 圆柱销 | DIN7 | GB119-86 | ISO2339 | Parallel pins |
| 开槽圆柱头螺钉 | DIN84 | GB65-85 | ISO1207 | Slotted cheese head screws |
| 开槽盘头螺钉 | DIN85 | GB67-85 | ISO1580 | Slotted pan head screws |
| 单耳止动垫圈 | DIN93 | GB854 | Tab washers | |
| 开口销 | DIN94 | GB91 | ISO1234 | Split cooter pins |
